Aratek's BM5510 is a hand-held smart terminal for mobile fingerprints and faces capture. The device is equipped with an optical fingerprint reader for scanning single fingers and 5 MP rear camera for face or barcode capture. According to the manufacturer, the device has wireless communication support, which includes 2G/3G networks, Wi-Fi and Bluetooth, as well as GPS navigation. The manufacturer also specifies that the terminal has IP54 dustproof and waterproof casing. BM5510 is provided with pre-installed Android OS and allows to run custom applications.
€350.00
Aratek's BM7500 is a hand-held smart terminal for mobile fingerprints and faces capture. The device is equipped with an optical fingerprint reader for scanning single fingers, 2 MP front camera and 8 MP rear camera for face or barcode capture. According to the manufacturer, the device has wireless communication support, which includes 2G/3G networks, Wi-Fi and Bluetooth, as well as GPS navigation. The manufacturer also specifies that the terminal has IP54 dustproof and waterproof casing. BM7500 is provided with pre-installed Android OS and allows to run custom applications.
€400.00
BioID Technologies’ BioIRIS is an ultra-compact binoculars type iris scanner which is designed to rapidly authenticate the identity of an individual by using their iris image. The BioIRIS features with superior iris image capture and matching algorithms to ensure the best quality images and avoid false positives while maximizing true positive identification rates. With an unparalleled user interface, the BioIRIS performs high speed dual iris capture and outputs high quality ISO standards compliant images. The BioIRIS makes the enrollment easier for both subject and operator.
€500.00
BioID Technologies’ BioPalm is the compact and lightest livescan system and fully complaint with FBI’S IAFIS Appendix F specification in the industry for forensic analysis, kiosk integration and suspect enrollment. The BioPalm device employs the most advanced optical technology and dedicated special light source that enable users to obtain the highest quality images including flats, rolls, slaps, palm and writer’s prints. The BioPalm is absolutely your logical choice for government and law enforcement agencies handling criminal bookings, forensic applications and background check submissions, etc.
€2,700.00
BioID Technologies’ BioSlap is the compact ten-print livescan device FBI’s IAFIS Appendix F certified and designed to capture four finger slaps, two thumbs or rolled finger simultaneously. The BioSlap employs the most advanced optical technology and dedicated special light source that allow high speed print image capturing and seamless image processing, which ensure the best image quality for slap prints as well as for rolled fingerprints. The BioSlap is absolutely your ideal choice for all your civil or criminal identification applications such as voter registration, national ID issuance, applicant background checks, etc.
€800.00
Easy to use, the system can be reliably positioned by the subject with minimal instructions, or by an operator with the aid of positioning feedback LEDs on the top of the imager’s housing. The patent pending optical design of the BMT-20 includes expanded depth of field and a very large interpupillary distance range, providing effortless capture for subjects of all ages. Intended for applications in which subjects have limited prior experience with biometrics devices, the BMT-20 is ideal for enrollment programs of all sizes, including those involving very young children.
€600.00
Credence-3 is an economical next generation biometric and credential reading identity platform that places the power of mobile authentication into the hands of users in the most demanding environments. This new platform features a 2.0GHz quad-core Single Board Computer (SBC) with 4GB-RAM 16GB-eMMC. Its dual-density mechanical enclosure achieves IP-65 water/dust protection and meets the stringent MIL-STD-810H drop test specifications.
€950.00
The Cross Match Guardian USB and FW are part of optical fingerprint scanners family intended for fast capture of all 10 fingerprints. The scanners are certified by FBI for both civil ID flats and full criminal ten-print flats. Scanners image quality complies with FBI's IAFIS Appendix F specification. These Guardian scanners are available as different models with high-speed USB 2.0 or IEEE 1394 (FireWire) interfaces, and options for rolled or flat-only fingerprints capture.
€3,800.00
Known as the industry leader in tenprint livescan capture, the HID Guardian 200 delivers performance, reliability and flexibility. Ideal for high-volume applications and capable of providing high-quality flat and rolled fingerprint images at all times.
€3,800.00
The Cross Match Patrol ID is designed for quick fingerprint capture in areas ranging from small offices to large public areas. The scanner is certified by FBI for as IAFIS IQS Appendix F compliant for civil ID flats for applicants. The Patrol ID can quickly capture all ten fingerprints as two four-finger slaps and dual thumbs. The fingerprint reader is suitable for using in various areas and applications as it is compact and powered from active USB hub. The device has IP54 rugged casing meaning that it is protected enough from dust and splashing water.
€1,800.00
The DigitalPersona U.are.U 4500 Fingerprint Reader is an optical USB 2.0 fingerprint scanner suitable for most users in common or shared computer environments. The reader is easy to install and use. U.are.U 4500 accommodates the widest range of fingerprint and skin conditions. An OEM module version is also available.
€125.00
The U.are.U 4500 Module is intended for integration into devices like PC keyboards, POS terminals or kiosks, entry and/or attendance control devices, etc. Technically the module is an OEM version of optical U.are.U 4500 fingerprint reader without metal case. The module is sealed from dust and designed to be easily mounted into various hardware. U.are.U 4500 module is available in standard and small footprint form factors.
€99.00
The U.are.U 5300 is a FIPS-201/PIV certified fingerprint reader from DigitalPersona. The scanner is also certified as compliant to FBI Mobile FAP 30 standard. It is also available as a fingerprint scanner module for OEM integration. The manufacturer specifies that the scanner's fingerprint sensor has an IP64-rated seal between the top case and glass surface. The scanner is able to reject latent or spoof fingerprints.
€150.00
Futronic FS10 is a PIV-certified fingeprint reader. Scanner features large 1" x 1" platen which makes it suitable for AFIS applications. FS10 is certified by the FBI as compliant with PIV-071006 Image Quality Specifications. The reader is also listed in US GSA FIPS 201 Approved Product List, which enables it to be used in government systems and applications. The scanner uses infra-red illumination for single flat fingerprints capture.
€99.00
Futronic's FS26 USB2.0 Fingerprint Mifare Card Reader/Writer combines a fingerprint scanner and an ISO14443A compatible MIFARE card reader/writer into one device. Live Finger Detection (LFD) is built in into FS26. The LFD allows to reject fake fingers made from silicone rubber, play-doh or other materials. The fingerprint and MIFARE card readers can be used together for two-factor authentication. A fingerprint template is stored on the card and can be compared with a fingerprint scanned with the fingerprint scanner. Also the fingerprint reader and MIFARE card reader can be used separately.
€123.00
Futronic FS28 is an autonomous fingerprint scanner. The scanner uses Bluetooth interface for connecting with a host device, like PC, tablet or smart phone. FS28 can also be connected to the host via USB port. FS28 fingerprint reader was certified by the FBI as PIV-071006 / FIPS-201 compliant, making it suitable for using in U.S. government systems. It can be also used for various applications like field usage by law enforcement officers, attendance check in remote locations etc. The device features a built-in LCD screen with 128 x 64 pixel resolution. There are also four buttons for operating the device. The device can report its status via red/blue LED or buzzer.
€250.00
FS50 fingerprint scanner is intended for professional applications. The scanner features large platen area (1.6" x 1.5") that allows to scan single or dual flat fingerprints, or single rolled fingerprint. The FS50 was certified by FBI to be compliant with PIV-071006 Image Quality Specification for Single Finger Reader. The scanner is also listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The FS50 meets the US Federal Information Processing Standard 201 (FIPS 201) for Personal Identification Verification (PIV) of Federal Employees and Contractors.
€273.00
Technically the FS51 module is an FS50 scanner without plastic case and USB cable. The module is intended for customers who want to integrate rolled or single/dual flat fingerprint scanner into their own hardware like handheld ID verification machine, portable voter registration station, etc. The FS51 is FIPS 201 / PIV compliant device and is listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The scanner features large platen area (1.6" x 1.5") that allows to scan single or dual flat fingerprints, or single rolled fingerprint.
€270.00
The FS64 ID Flat Fingerprint Scanner from Futronic is an FBI certified (Appendix F) fingerprint reader. The scanner captures four-finger slaps, dual thumbs, as well as single rolled and flat fingerprints. The manufacturer specifies that the scanner features IP54 casing meaning that its internals are protected against dust, physical contact and water projected by a nozzle. The enforced construction consists of ABS outer shell and internal frame from aluminium alloy. The device is fully powered via USB and does not require external power supply. The device provides integrators with programmable two-color LEDs, buttons and buzzer for developing user-friendly interfaces. Scanner's compact and robust design makes it suitable for large-scale applications like border control, voter control during elections, biometric passport projects and others.
€750.00
Futronic's FS80H USB 2.0 Fingerprint Scanner is based on CMOS sensor technology and precise optical system that allow to capture high quality fingerprint images almost without distortions. Problematic fingerprints (wet, dry or blurred) can be reliably scanned with FS80H as it uses infra-red LEDs for finger illumination. Image quality optimization is obtained by automatical adjustment of illumination intensity for each finger. Live Finger Detection (LFD) is performed by a separate electronic circuit build into FS80H. This feature allows to reject fake fingers made from silicone rubber, play-doh or other materials. The LFD can be optionally enabled from user application.
€60.00
Futronic FS81 is an OEM module version of FS80 fingerprint scanner. The module includes a CMOS sensor with precise optical system for fingerprint capture. The optical system allows to capture fingerprint images without any distortions. Problematic fingerprints (wet, dry or blurred) can be reliably scanned with the module as it uses infra-red LEDs for finger illumination. Image quality optimization is obtained by automatical adjustment of illumination intensity for each finger. FS81 module has rugged sensor with a crown glass scanning window (14 mm thickness).
€60.00
Futronic's FS82 USB 2.0 Fingerprint Smart Card Scanner is a combination of FS80H fingerprint scanner hardware and ISO7816 smart card reader. The fingerprint and smart card readers can be used together for two-factor authentication. A fingerprint template is stored on smart card and can be compared with a fingerprint scanned with the fingerprint scanner. Also the fingerprint reader and smartcard reader can be used separately. The fingerprint reader part features precise optics and infra-red illumination that allow to scan wet, dry, blurred and other problematic fingerprints reliably.
€83.00
Futronic FS83 serial Fingerprint Authentication Module (sFAM) is suitable for using as a remote scanner or as an embedded module. The module can be embedded into access control device, point of sales machine, electronic safe or other similar device. 4 wires serial interface allows to control the module from any host computer. The manufacturer specifies that the module itself is also able to store and recognize fingerprint templates thus it can be used as an embedded fingerprint recognition device. Note, that power adapter or power supply are not included with sFAM.
€87.00
Futronic FS84 ethernet Fingerprint Authentication Module (eFAM) is suitable for using as a remote scanner or as an embedded module. The module can be controlled by any host system via Ethernet (TCP/IP). 4 wires serial interface is also available. The manufacturer specifies that the module itself is also able to store and recognize fingerprint templates thus it can be used as an embedded fingerprint recognition device. The module is able to control an external relay via an output channel. Also it can read information via 2 input channels from external sources like door sensor or switch.
€103.00
Futronic's FS88H is an enhanced version of FS80H fingerprint scanner. The FS88H was certified by FBI to be compliant with PIV-071006 Image Quality Specification for Single Finger Reader. The scanner is also listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The FS88H meets the US Federal Information Processing Standard 201 (FIPS 201) for Personal Identification Verification (PIV) of Federal Employees and Contractors. The scanner is suitable for high-traffic applications like border control, identity card, driver license, election or any other type of civilian AFIS, as it is able to capture high quality fingerprint images almost without distortions and has a rugged sensor.
€80.00
Technically the FS88 module is an FS88H scanner without plastic case and USB cable. The module is intended for customers who want to integrate FS88 into their own products, like handheld POS devices or portable voter registration stations. The FS88 scanner is FIPS 201 / PIV compliant device and is listed in the US General Services Administration (GSA) FIPS 201 Evaluation Program Approved Product List. The FS88 sensor is rugged enough to be used in mobile solutions that may require heavy user interaction in various environments.
€80.00
The DactyScan40p from Green Bit is an optical fingerprint reader that is able to capture dual flat fingerprints and single rolled or flat fingerprints. The scanner is certified by FBI as IAFIS IQS Appendix F and PIV compliant. The manufacturer specifies that the scanner is compact, has low power consumption from USB port, and thus is suitable for high-traffic mobile ID solutions, like border control, on-the-road identification, passport issuance etc. The device has also 10 LEDs (one for each finger) for more convenient capture of all 10 fingerprints from a person.
€450.00
DactyScan84c from Green Bit is an optical live fingerprint reader with large platen. The reader is capable to capture 4-slap and 2-thumbs fingerprints, allowing to collect all 10 fingerprints using 4+4+2 method. Also the DactyScan84c can capture single rolled and flat fingerprints. The device is certified by FBI as compliant with FBI IAFIS IQS CJIS-RS-0010 (V7) Appendix F. Also it is compliant with ANSI/NIST-ITL-1-2007, ANSI/NIST-ITL-1-2000 and ISO/IEC 19794-4 standards.
€1,000.00
MultiScan527 from Green Bit is an optical palm print and fingerprint reader. The scanner is able to acquire half-palm images (upper and lower), four-finger slaps, dual thumbs, as well as single rolled and flat fingerprints. The device is certified by the FBI as compliant with FBI IAFIS IQS CJIS-RS-0010 (V7) Appendix F and is also compliant with Appendix P requirements. The manufacturer specifies, that the MultiScan527 can be optionally equipped with additional accessories like smart card / NFC reader, foot pedal etc. Also, an OEM scanner module is available for embedding into custom solutions.
€5,500.00
The EikonTouch TC710 USB capacitive silicon fingerprint reader has a compact design with improved finger guide ergonomics for ease of use. The new design offers LED feedback above the finger placement area for intuitive fingerprint enrollment, capture and verification. The reader’s small form factor and weighted base allows for stability on even the smallest surfaces and is ideally suited for […]
€135.00
EikonTouch 510 from DigitalPersona is a capacitive fingerprint reader. The reader is based on TCS1C fingerprint sensor. The manufacturer specifies that the device has SteelCoat coating, which can withstand more than 4 million touches. Also specified the rugged IP63 - rated casing, meaning that the device is sealed from contact with dust and withstands spraying water.
€125.00
When you need to replace vulnerable passwords and PINs with a secure authentication solution, multispectral biometrics from HID Global delivers. The Lumidigm® M-Series fingerprint reader outperforms conventional devices in its class, delivering usability, high-performance liveness detection and reliable biometric matching perfect for PC-based authentication, IT security, and single sign-on (SSO).
€1,100.00
Integrated Biometrics' Columbo is a single fingerprint reader designed for desktop applications. It is certified as PIV / FIPS 201 and FBI Appendix F FAP 30 compliant fingerprint scanner. The scanner is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. The manufacturer specifies that the device has IP65 Sealed bezel, meaning that it is protected from dust and splashing water.
€99.00
Integrated Biometrics’ revolutionary FIVE-0 is the first FBI certified optical fingerprint scanner that delivers fast FAP 50 enrollment and verification in a package small enough to fit in a shirt pocket. Built for law enforcement, military, border control, and national ID programs, FIVE-0 sets the standard for truly mobile identity management operations. FIVE-0’s compact, lightweight design provides exceptional performance and reliability for field operations. It resists latent fingerprints, dirt, cold, heat, bright lights, and direct sunlight. There are no silicone membranes or light sources to replace. Each unit can operate for hours using power provided by a smartphone or other mobile device.
€1,800.00
The Kojak is a compact ten-finger biometric scanner which is manufactured by Integrated Biometrics. The reader is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. The large platen allows to capture four-print slaps, dual thumbs and single flats. Also, the scanner can capture rolled fingerprints. The manufacturer specifies that the device has low power consumption and light weight, which make it suitable for mobile applications.
€1,400.00
The Kojak is a compact ten-finger biometric scanner which is manufactured by Integrated Biometrics. The reader is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. The large platen allows to capture four-print slaps, dual thumbs and single flats. The manufacturer specifies that the device has low power consumption and light weight, which make it suitable for mobile applications.
€950.00
Integrated Biometrics' Sherlock is a compact dual finger reader intended for integration into custom hardware. The scanner is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. Dual and single flats, as well as single rolled fingerprint can be captured. The manufacturer specifies that the device has IP65 rating, meaning that its internals are completely sealed and protected from dust and water projected from a nozzle.
€450.00
The Watson Mini is a dual fingerprint reader from Integrated Biometrics designed for desktop usage. The scanner has been certified by the FBI as Appendix F FAP 45 and PIV compliant. Watson Mini is is based on proprietary LES (Light Emitting Sensor) technology, which ensures high-quality fingerprint scanning even when dirty, dry or rough fingers are scanned. Dual and single flats, as well as single rolled fingerprint can be captured. The manufacturer specifies that the device has IP65 rating, meaning that its internals are completely sealed and protected from dust and water projected from a nozzle.
€350.00
The IriShield USB BK 2121U is a dual iris capture camera. The camera is powered via USB port and can be used with PCs and laptops, which run Microsoft Windows OS, as well as with devices which run Android or Linux OS. The iris capture module comes in binoculars-shaped case, which means the irises are captured using fixed distance. The sealed case and infrared LED illumination makes the camera suitable for outdoor usage. The captured iris images are compliant with ISO/IEC 19794-6 standard.
€499.00
The IriShield USB MK 2120U is a ready-to-use single iris capture camera. The compact camera is powered via USB port. Its low power consumption and mobile OS support makes it suitable for using with smartphones, tablets or other handheld devices. Each eye is illuminated by infrared LED, thus irises can be captured in various indoor and outdoor environments. The captured iris images are compliant with ISO/IEC 19794-6 standard. IriShield - USB MO 2120 – an OEM module version of this device is also available.
€199.00
The IriShield USB MO 2120 is a ready-to-integrate component for single iris capture. The component includes a camera module and an USB board. Low power consumption and mobile OS support makes it suitable for using in various embedded or handheld solutions. Each eye is illuminated by infrared LED, thus irises can be captured in various indoor and outdoor environments. The captured iris images are compliant with ISO/IEC 19794-6 standard. IriShield - USB MK 2120U – a ready-to-use end user iris camera based on this hardware is also available.
€189.00
The V300 series fingerprint sensors from Lumidigm are based on company's patented multispectral imaging technology. The technology allows to scan both finger's surface and subsurface tissues thus allowing to capture high quality fingerprint images even from problematic fingers like wet, dry, dirty or affected by age and/or environment related changes. The multispectral imaging technology also allows to reject fake or spoof fingers by capturing detailed surface and deep tissue data. The sensors can be integrated to various devices as they use USB or RS-232 connection interfaces.
€450.00
MARC10 is a compact, precise, and secure capacitive fingerprint scanner ideal for authentication and identification. Its advanced sensor captures high-quality fingerprints, supporting MINEX compliance and FBI standards. Designed for ease of installation and operation, MARC10 meets industry requirements for reliability and convenience.
€73.00
MARC10 is a compact, precise, and secure capacitive fingerprint scanner ideal for authentication and identification. Its advanced sensor captures high-quality fingerprints, supporting MINEX compliance and FBI standards. Designed for ease of installation and operation, MARC10 meets industry requirements for reliability and convenience.
€65.00
MATISX is a dual-iris scanner device by Mantra that captures double iris images of an individual simultaneously. It is designed with advanced biometric technology and compliant with ANSI NIST and ISO image interchange format. MATISX offers convenience, reliability, and durability with features like auto capture, adjustable interpupillary distance range, and immunity to ambient lighting.
€585.00
MELO31 is a rugged and secure FBI PIV-certified fingerprint scanner with advanced features for high accuracy and security. It is designed for large-scale identification and verification projects in wet environments and has a large platen area for precise and convenient biometric data capture. MELO31 is easy to use and can be integrated into various systems using their SDKs.
€208.00
MELO31 is a rugged and secure FBI PIV-certified fingerprint scanner with advanced features for high accuracy and security. It is designed for large-scale identification and verification projects in wet environments and has a large platen area for precise and convenient biometric data capture. MELO31 is easy to use and can be integrated into various systems using their SDKs.
€178.00
The Mantra MFS500 is a high-quality fingerprint scanner equipped with an optical scratch-free sensor for efficient recognition of poor quality fingerprints. It is an accurate, safe, and reliable device for identifying and verifying individuals, eliminating the need for passwords or PINs. The scanner captures fingerprint images quickly and reliably, making it suitable for identification, verification, and authentication processes.
€52.00
The Mantra MFS500 is a high-quality fingerprint scanner equipped with an optical scratch-free sensor for efficient recognition of poor quality fingerprints. It is an accurate, safe, and reliable device for identifying and verifying individuals, eliminating the need for passwords or PINs. The scanner captures fingerprint images quickly and reliably, making it suitable for identification, verification, and authentication processes.
€52.00
The Mantra MFS500LX is a durable and secure biometric fingerprint scanner that offers precise and rapid verification. It is FBI PIV-071006 compliant and IP54 certified, resistant to dust and splashing water. The MINEX compliant device provides consistent image quality and accurate results, and can be used as a password. It is exclusive for MOSIP Ecosystem.
€91.00
The Mantra MFS500LX is a durable and secure biometric fingerprint scanner that offers precise and rapid verification. It is FBI PIV-071006 compliant. The MINEX compliant device provides consistent image quality and accurate results, and can be used as a password. It is exclusive for MOSIP Ecosystem
€85.00
The MIS100V2 is a high-quality USB IRIS sensor ideal for identity applications such as Aadhaar authentication, banking, and access control. It has a quality algorithm that can identify poor IRIS images and adjust based on inbuilt LED indications. The sensor uses proprietary distance sensing and focus analysis technology for fast auto capture capabilities. It is STQC certified and has a high-resolution CMOS sensor that creates quality images with JPEG2000 compression.
€169.00
The MIS100V2 is a high-quality USB IRIS sensor ideal for identity applications such as Aadhaar authentication, banking, and access control. It has a quality algorithm that can identify poor IRIS images and adjust based on inbuilt LED indications. The sensor uses proprietary distance sensing and focus analysis technology for fast auto capture capabilities. It is STQC certified and has a high-resolution CMOS sensor that creates quality images with JPEG2000 compression.
€169.00
MORPHS is a high-performance, portable slap fingerprint scanner that captures all ten fingerprints with ease. Its innovative design allows for rapid and accurate fingerprint capture, making it ideal for government and commercial projects. With its IP54 rating, ergonomic design, and easy-to-integrate SDK architecture, MORPHS is the perfect choice for system integrators and solution providers looking for a reliable and efficient biometric verification and enrollment solution.
€910.00
MORPHS is a high-performance, portable slap fingerprint scanner that captures all ten fingerprints with ease. Its innovative design allows for rapid and accurate fingerprint capture, making it ideal for government and commercial projects. With its easy-to-integrate SDK architecture, MORPHS is the perfect choice for system integrators and solution providers looking for a reliable and efficient biometric verification and enrollment solution.
€806.00
SecuGen Hamster IV is an FBI FIPS 201 / PIV compliant optical fingerprint scanner with USB 2.0 connection. The scanner is based on a rugged and advanced optical sensor using patented SEIR fingerprint biometric technology. SecuGen iD-USB SC/PIV is based on the same fingerprint sensor. It features fingerprint scanner and smart card reader in one device.
€80.00
SecuGen Hamster Plus is an USB 2.0 optical fingerprint scanner. The Hamster Plus is based on a rugged and advanced optical sensor using patented SEIR fingerprint biometric technology. SecuGen iD-USB SC is based on the same fingerprint sensor. It features fingerprint scanner and smart card reader in one device.
€75.00
SecuGen Hamster Pro is a compact single fingerprint reader intended for projects, which need basic fingerprint scanning functionality for a reasonable price. According to the manufacturer, the scanner is based on durable fingerprint sensor, which is impact-proof and resistant to scratches and other stresses. The sensor works well with dry, aged or scarred fingerprints.
€45.00
SecuGen Hamster Pro 20 is a compact optical fingerprint reader which captures single flat fingers. The scanner is compliant with FIPS 201 / PIV (FIPS-201) and Mobile ID FAP20 requirements. According to the manufacturer, Hamster Pro 20 is able to reject spoof fingerprint images and latent fingerprints, thus preventing certain types of fraud like using photocopied fingerprints. The scanner works well with dry, aged or scarred fingerprints.
€80.00
iD-USB SC from SecuGen is an USB device that combines fingerprint scanner and smart card reader. The fingerprint scanner uses the same sensor as SecuGen's Hamster Plus. The optical sensor features automatic finger placement detection that is used for enabling fingerprint scanning. The embedded smart card reader is based on HID OMNIKEY 3121 hardware. It is compliant with ISO7816 and EMV 2000 level 1 standards. 5V, 3V and 1.8V smart cards are accepted. The reader supports PC/SC and PC/SC-based APIs.
€110.00
iD-USB SC/PIV from SecuGen is an USB device that combines fingerprint scanner and smart card reader. The device is certified by FBI as PIV-071006 (FIPS-201) compliant fingerprint reader. The fingerprint scanner uses the same PIV-certified sensor as SecuGen's Hamster IV. The optical sensor features automatic finger placement detection that is used for enabling fingerprint scanning. The embedded smart card reader is based on HID OMNIKEY 3121 hardware. It is compliant with ISO7816 and EMV 2000 level 1 standards. 5V, 3V and 1.8V smart cards are accepted. The reader supports PC/SC and PC/SC-based APIs.
€170.00
SMUFS BT is a bluetooth fingerprint reader with capacitive sensor for capturing flat fingerprints. The manufacturer specified that SMUFS BT is based on UPEK TCS1 fingerprint sensor, which is certified by the FBI as PIV/FIPS 201 compliant. The fingerprint reader is powered by a Li-ion rechargeable battery. The battery is removable, thus the device can be used in the field for longer periods of time.
€325.00
Xperix BioMini Slim 2 is a compact single finger reader. The reader is certified by the FBI as PIV (FIPS-201) and Mobile ID FAP20 compliant. The manufacturer specifies that BioMini Slim 2 includes live finger detection that allows to reject fake or spoof fingerprints. The fingerprint sensor surface has IP65-rated protection level, meaning that its internals are completely sealed and protected from dust and water projected from a nozzle. The device has ultra-slim form-factor, which provides flexibility for its usage scenarios.
€75.00
BioMini Slim 3 is FAP30 certified fingerprint scanner featuring an array of cutting-edge technologies. Along with its 15mm slim optical sensor, BioMini Slim 3 features Xperix proprietary Multi-dynamic Range (MDR) technology, FBI PIV/Mobile ID FAP30 compliance and Android device support. BioMini Slim 3 also provides developers more physical flexibility with its reduced form factor and the ultra-slim optical sensor ensures robust operation over time.
€95.00
RealScan S60 is the FBI Appendix F certified, Ultra Slim, and Lightweight Fingerprint live scanner. In combination with Xperix ID’s proprietary fingerprint algorithm and an advanced TFT (Thin Film Transistor) - optical technology, RealScan S60 enables capture of the highest fingerprint image quality flat and rolled fingers with little effect from various fingerprint conditions. In addition, Xperix ID’s award-winning fake fingerprint detection algorithm with deep learning technology maximizes the benefit to its customers to distinguish real and fake fingers with excellent accuracy. Its small form factor optimized not only for desktop solutions but also for easy integration into portable devices, provides a significant advantage for customers to maximize the benefit from their product and solution.
€1,400.00
The RealScan-D from Xperix is an optical live fingerprint reader. The device is certified by FBI as suitable for civil and forensic AFIS. RealScan-D features fingerprint sensor with large platen that allows to scan two flat fingerprints simultaneously, as well as single rolled or flat fingerprints. The manufacturer specifies that the scanner provides high quality capture for wet and dry fingers. Scanner's design allows to use it in kiosk applications.
€400.00
Xperix RealScan-G10 is a compact live fingerprint reader that is able to capture flat and rolled fingerprints. The RealScan-G10 is certified by the FBI as IAFIS IQS Appendix F compliant fingerprint scanner. The device is also compliant to IDENT, US-VISIT and DHS requirements. The scanner is able to capture plain ten-prints using four-finger slaps and dual-thumbs capture. Single flat and rolled fingerprints capture is also supported.
€1,000.00
VistaEY2 is a compact dual iris and face camera manufactured by Vista Imaging. The device is able to capture both irises simultaneously. Also the device includes 3 Megapixel camera for face capture and microphone for voice capture. The device produces standards-compliant iris and face images: the captured iris images are compliant to the ISO/IEC 19794-6 standard and the face images – to the ISO/IEC 19794-5. The manufacturer specifies that VistaEY2 multi-positional iris illumination allows authentication on target subjects with eyewear.
€1,499.00
VistaEY2H is a compact dual iris camera manufactured by Vista Imaging. Camera's design features integrated visor for convenient iris capture. The manufacturer specifies that the camera is able to reliably detect when the captured irises belong to real "alive" eyes. The captured images are compliant to the ISO/IEC 19794-6 standard.
€699.00
VistaEY2P is a compact multimodal biometric device that is able to capture dual iris and face images. The device provides single gesture iris & face capture with LiveEye anti-Spoof Detection. Irises and face capture is performed at 22" (about 0.5 m) distance. Iris images capture is improved by using multi wavelength infra-red illumination, distance sensing technology, integrated mirror and LED-based feedback. Multi-positional iris illumination allowing authentication on most target subjects with eyewear. An integrated flash allows to capture faces in low-light environments. The iris images are ISO/IEC 19794-6 compliant and face images are ISO/IEC 19794-5 compliant.
€1,999.00
VistaFA2 from Vista Imaging is a compact multi-modal device that allows to capture iris and face images. The device uses USB 2.0 connection for communication with host devices. The VistaFA2 acquires iris images that are compatible with ISO/IEC 19794-6 standard and face images that are compatible with ISO/IEC 19794-5 standard. Iris images are captured using the proprietary distance sensing and accurate focus analysis. Face images are captured using a 3 Mega-pixel camera with possibility to use built-in flash in low-light environments.
€1,050.00
